This filter was designed to be used with very high frequency switching power supplies such as the Vicor "HAM" units. The specific design of this filter is to control the conducted emissions to meet the requirements of EN55022. The physical size of this filter is well suited for printed circuit board mounting. The low profile and compact size uses a minimum of board space.
 |
 |
 |
Operating Voltage | 115 / 250 VAC |
| Operating Current | 6.3 amperes | |
| Operating Frequency | 50/60 Hz | |
| Operating Temperature | -20 to 50 deg. C | |
| Dielectric Withstanding (Line-Ground) | 1500 VAC
for 1 minute |
|
 |
Dielectric Withstanding (Line to Line) | TVS Diode Protected
to 390-430 VDC |
| Leakage Current | 1.0 mA @ 250 VAC, 50Hz | |
| Residual Voltage (Max after 5 sec.) | 34 Volts | |
| Agency Approvals | UL, CSA, TUV | |
| Need a variation of the 1055 Series Filter? JMK filter
designs can often be modified to meet our customers needs. Changes
in input and output connection styles and even enclosure dimensions are
frequently possible. If you need a modification of the 1055 Series,
E-mail our Engineering Department
and explain your requirements
Interested in placing an order for a 1055 Series Filter? Use our On-Line Purchase Order. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|