The 1041 series is designed to provide attenuation to switching regulator noise etc. At the power input to large computers and  memory systems. These filters are also useful at the input to shelters, motor banks, facility power inputs or any installation  requiring good common-mode and differential filtering. This series can be used on either Wye or Delta power systems.

	Operating Voltage	250 / 480 VAC 3 PH WYE
	Operating Current	80, 100 amperes
	Operating Frequency	50/60  Hz
	Operating Temperature	-10 to 50  deg. C
	Dielectric Withstanding (Line-Ground)	1500 VAC  for 1 minute
	Dielectric Withstanding (Line to Line)	1500 VDC  for 1 minutes
	Leakage Current	6.0 mA @ 250 VAC, 50Hz
	Residual Voltage (Max after 5 sec.)	34 Volts
	Agency Approvals
	Need a variation of the 1041 Series Filters?  JMK filter designs can often be modified to meet our customers needs.  Changes in input and output connection styles and even enclosure dimensions are frequently possible.  If you need a modification of the 1041 Series, E-mail our Engineering Department and explain your requirements  Interested in placing an order for an 1041 Series Filter?  Use our On-Line Purchase Order.